Ambient NanoLockit Tutorial
  1. Manuals
  2. Brands
  3. Ambient Manuals
  4. Timer
  5. NanoLockit
  6. Tutorial

Ambient NanoLockit Tutorial

Hide thumbs Also See for NanoLockit:
1
2
3
4
5

Advertisement

Table of Contents

Connect your NanoLockit to a
Sony Alpha 7s

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NanoLockit and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Ambient NanoLockit

Summary of Contents for Ambient NanoLockit

  • Page 1 Connect your NanoLockit to a Sony Alpha 7s...
  • Page 2 In this tutorial, we will show you how to timecode sync a DSLR-Camera like the Sony Alpha 7s to an Ambient NanoLockit. We will use the following gear: a Sony Alpha 7s and an audio recorder. To timecode sync this setup, you will...
  • Page 3 But before we can connect the NanoLockit, we need to set up the camera for use with an external timecode device and adjust the Frame Rate. To do so, press „Menu“ and select „Re- cord Setting“. Make sure to select the correct frame rate for your upcoming project –...
  • Page 4 1. Manually set the camera audio input level to 50% of the range. 2. Adjust the NanoLockit TC output level by either pressing green and repeatedly tap red to reduce level or vice versa. Make sure that the meter falls between –30 dB to –20 dB.
  • Page 5 For more information on that subject see our other Ambient tutorials. Additionally we strongly recommend that you check the synchronisation of your system by performing a test-run before shooting starts to avoid any issues.

Table of Contents