podis
MOT FA C/CM/CP 3I/I4O Device Description | 2
®
.3 Mechanical design / housing
Based on its mechanical design, the housing of the podis MOT FA C/CM/CP 3I/1I4O is divided
into an upper and a lower part.
The upper housing part contains the electronics for the control of the drive and for the I / Os.
The upper part is fastened onto the lower part using four screws.
The base contains the connection technology for the podis energy bus.
The electrical connection between hood and base is implemented via a cable harness from
the base connected to a PCB pluggable connector in the hood.
podis
.4 Connections, control and display elements
Connections at
the podis
MOT
®
1
FA C 3I/I4O
2
3
4
5
Connections at the podis
1 ADDR
2 AS-i (X2)
3 IN0 (X3)
4 IN1 (X4)
5 IN2 (X5)
6 X1
.
FA C 3I/I4O
®
MOT
(opened),
MOT C 3I/I4O
®
Connection of the AS-i hand-held terminal
Connection of the AS-i tap line
Digital M12 input to connect a sensor
Digital M12 input to connect a sensor
Digital M12 input to connect a sensor
Interface to the drive
Hood with integrated
electronics
Pluggable connection
between hood and base
Base with connection technology
(hidden by cover plate)
FA CM 3I/I4O and FA CP 3I/I4O similar
6
Wieland Electric | BA000341 | 02.2007