Chapter 3 Mode Introduction - RCA BR200DV Service Manual

Mode combinations
Mode
Normal User
User
Mode
Programming
Data
Programming
Mode
PC
Test Mode
Mode
Firmware
Upgrading
Mode
Normal User Mode：
You can enter Normal User Mode (conventional communication mode) by turning on the
power switch. Users in the mode can use the defined function of the radio.
Field Programming Mode：
You can enter the Field Programming Mode by pressing the "Menu" Key or a programmable
key to enter this mode.
Data programming mode:
Before leaving the factory, the radio has been set in factory. However, due to different
requirements of users, functional parameters of the radio such as working frequency,
channels, CTCSS/DCS and auto scanning, etc. should be set again. Therefore, the
company has specially designed a set of DR-6000 programming software with friendly
interface, convenient operation and visualized display for setting functional parameters of
the radio.
Steps for setting the functional parameters of the Radio by computer are as follows:
Chapter 3 Mode Introduction
For normal use
Mode
Field
Programming the basic
information of the radio
Mode
Reading and writing
frequency data and other
functions
Used to tune the radio
using the PC.
Upgrades the software
when new features are
added
BR200DV/BR300DV Service Manual
Function
10
How to access
Power on
Menu or Programmable
Key
Receive instructions from
the PC
Receive instructions from
the PC
Receive instructions from
the PC