Download Print this page

Easyrig Mini Instructions

Changing the spring balancer

Download this manual

Changing the Turtle X

Changing the Easyrig Mini

spring balancer

Tools that are needed:

- Screwdriver

- Hexagon keys 4 mm and 5 mm

- Universal screw spanner

- Spring cord tool

Page 1 Changing the Turtle X Changing the Turtle X Changing the Easyrig Mini spring balancer spring balancer spring balancer Tools that are needed: Tools that are needed: - Screwdriver - Screwdriver - Hexagon keys 4 mm and 5 mm - Hexagon keys 4 mm and 5 mm...
Page 2 1. Remove the plastic cover by removing the four knobs. Take out the support bar. 3.Remove the spring balancer by opening the 2. Remove the plastic cover on the camera hook M4 x 35 mm screw. and open the knob. 5.
Page 3 important to have it in correct position. By using the hexagon you can keep the wheel in position. 6. Mount the M4 x 35 screw. When the screw is 7. Mount the line through the arm by using the through the nut it’s perfect, otherwise the cover can spring cord tool.
Page 4 11. Apply black tape to cover up the knot. 10. Drag the line through the hook cover and the hook and make a knot in the end. 12. Apply glue inside the hook cover to make it stick to the hook. www.easyrig.com...