Installation
Power Supply
Before plugging your unit in, be sure the source voltage in your area matches the voltage
required for your lighting setup. Every unit has a power supply capable of 120V. Because line volt-
age may vary from venue to venue, you should be sure your unit voltage matches the wall outlet
voltage before attempting to operate your unit.
* Always connect this product to a protected circuit with an appropriate electrical ground to avoid the risk
of electrocution or fire.
Mounting
When mounting your ellipsoidal, make sure there is adequate room for ventilation. Operating
in an insufficiently ventilated room can lead to an overheating of the device and may cause serious
accidents. Keep a minimum distance of 6 inches around and above the device. Before
deciding on a location, mount in a way that it will be easy to access the unit for maintenance and
addressing.
(615) 599-1505
www.springtree.net
5
Need help?
Do you have a question about the P200RGBW LED and is the answer not in the manual?