Advertisement
SAM ELECTRONIC EQUIPMENT (HK) LIMITED
1.Footswitch
2.Power Supply
3.Motor
4.Top Cutter
5.Bottom Cutter
6.Power wire Connector
7.Safe Precaution
8.Footswitch Connector
3． ． ． ． 4 Power connection
1． ． ． ． Check the power supply for 220V-230V,50Hz-60Hz
2． ． ． ． Use only tri-core wire for power connection
Make sure to turn off the power if the machine does not response after turning it on.
Address: Room1701,17/F,HenanBuilding, NO.90-92JaffeRoad,Wanchai,HongKong
TEL:00852-58042046
Install foot-switch 1 to No. 8
FAX：00852-31158812
www.china-sam.com
- 7 -
Advertisement
