Advertisement
5. CLEANING
The exposed surface of the remote phosphor panel is a tough, impact resistant polycarbonate. To
maintain efficiency, it should be cleaned with a mild soap or neutral PH cleaner. Abrasives or
cleaners containing chlorinated or aromatic hydrocarbons should not be used. Once clean, rinse with
cold water and wipe dry with a soft cloth.
6. TECHNICAL SUPPORT
Tel: 317 916-4274
Web:
http://www.hornerlighting.com
6/20/2014
No part of this publication may be reproduced without the prior agreement and written permission of Horner Lighting Group, LLC. Information in this document is subject to change without notice.
Fax: 317 639-4279
Email:
techsppt@HornerETG.com
LMAN0009-03-EN
ETG-LRP INSTALL SHEET
Page 5 of 5
Advertisement
