Advertisement
1. The name of each part
Controller
Power Switch
Cushion
Connector
2
Temperature Control Dial
Power Lamp
Temperature Control Lamp
Main Body
2. Using the product
1. Connect the connector
1. Connect the temperature controller connector to that of the
mat's main body.
- Both grooves must match for connection.
2. Connect the power cord
1. Connect the power cord to the socket.
- This product is used only for 220V-240V~
Before connecting the cord, be sure to check
※ Do not use loose socket or damaged power code.
3. Use the temperature
1. Connect the power cord and press the power switch on the
controller
controller to turn power on.
- Then power lamp turns on.
2. When the setting temperature is low, temperature control lamp
turns on. And once the temperature reaches the setting
temperature, it turns off automatically.
3. Press the power switch once again to turn power off.
4. After 12 hours, temperature controller turns off automatically
after 12 hours.
4. How to control
1. After pressing the power switch, fix the temperature control
the temperature
dial to the desired temperature.
(Temperature - : 30℃ / + : 65℃)
5. When the product is not
1. Press the power switch once again to turn power off.
in use
2. Be sure to disconnect the power cord from the socket when
the product is not in use.
Extended period of use at high temperature poses risk of burns.
Be sure to set the dial to "-" when using the product for an extended period.
Caution
3
Advertisement
