Yamaha Fino Owner's Manual page 44

PERIODIC MAINTENANCE AND ADJUSTMENT
ZAUU0044
Panel C
To remove the panel
1. Open the seat. (See page 4-9.)
2. Remove the bolts, and then pull
the grab bar off as shown.
7
3
1
ZAUU0045
✕
1. Bolt ( 4)
EAUU0510
2. Panel C
3. Grab bar
3. Remove the screws, and then pull
the panel off as shown.
1
1
ZAUU0046
✕
1. Screw ( 4)
2. Panel C
To install the panel
1. Place the panel in the original po-
1 1 1
2 2. Place the grab bar in the original
Tightening torque:
Cowling A
To remove the cowling
2
1
ZAUU0754
1. Cowling A
1. Remove the screws from cowling
7-7
sition, and then install the screws.
position, and then install the bolts.
Grab bar bolt:
10 Nm (1.0 m·kgf, 7.23 ft·lbf)
B.
EAUU0272