Using Stopwatch; Setting A Timer - Huawei Band 4 Pro User Manual

HUAWEI Band 4 Pro
User Guide
2.

2.6 Using Stopwatch

To use the Stopwatch function on your band, do the following steps:
1.
2.
3.

2.7 Setting a Timer

To use the Timer on your band, perform the following steps:
1.
2.
3.
4.
Issue 01 (2020-01-14)
Touch the camera icon on the band screen to take photos on your phone. The
band will return to the camera shutter screen two seconds after taking a
photo.
1. The band screen will automatically turn off if no operation is performed on the
camera shutter screen for five seconds.
2. From the camera shutter screen, touch the Home key to return to the home screen,
or swipe right on the band screen to go back to the previous screen.
3. To exit the camera shutter screen on your band, close the Camera app on your
phone or disconnect your phone from the band.
Touch More and then select Stopwatch.
Touch to start timing. The stopwatch can count up to "59:59.9".
Once it hits that number it will stop on its own.
While Stopwatch is running, you are able to:
– Touch
– Touch
– Touch
– Swipe right to return to More screen without stopping timing.
To use this function, go to More > Timer on your band screen.
Setting the Timer
– When using the Timer function for the first time, access the Timer
settings screen of your band, and set the hours, minutes, and seconds.
The value range for hours is 0–11, while that of minutes and seconds is
0–59.
– If you have used the Timer function before, open the Timer screen you
accessed last time and touch
seconds.
Touch to start the Timer.
Touch to pause the timing, and touch
Copyright © Huawei Technologies Co., Ltd.
to stop timing.
to resume timing.
to end timing and reset the stopwatch to "00:00.0".
2 App management
, and set the hours, minutes, and
to end it.
19