Built-in installation of two or more appliances Free-standing installation two or more appliances Completing the installation Anti-tipping safety assembly Mounting the handles on stainless front Ventilation Post installation control Start Up www.fhiaba.com · info@fhiaba.com · Tel +39 (0)434 420160 · Fax +39 (0)434 420161...
Use the same caution at the end of the lifespan of the new ap- pliance. www.fhiaba.com · info@fhiaba.com · Tel +39 (0)434 420160 · Fax +39 (0)434 420161...
Additional equipment necessary Phillips head screwdriver wood and percussion drill 2.5 mm (1/8”) bit for wood 8 mm (3/8”) bit for walls 17 mm (3/4”) wrench 4 www.fhiaba.com · info@fhiaba.com · Tel +39 (0)434 420160 · Fax +39 (0)434 420161...
XS899: 899 ”) at the distance from the wall XS749: 749 (29”) described in gure. 5⁄ 8 XS599: 599 ”) 635 (25”) 1T/0T 560 (22”) 693 (27 ¼”) www.fhiaba.com · info@fhiaba.com · Tel +39 (0)434 420160 · Fax +39 (0)434 420161...
Page 11
The appliance should always be transport- ed in an erect position. Avoid at all costs leaning it on its front side. www.fhiaba.com · info@fhiaba.com · Tel +39 (0)434 420160 · Fax +39 (0)434 420161...
Once the appliance has been connected to the water system, turn the Ice Maker off (touch the button on control panel to switch it off) before the main water is shut off. www.fhiaba.com · info@fhiaba.com · Tel +39 (0)434 420160 · Fax +39 (0)434 420161...
Page 13
Fit one end of the water hose onto the connector at the appli- ance’s back Fit the other end of the hose to the water tap, use the gaskets pro- vided in the Owner’s Kit www.fhiaba.com · info@fhiaba.com · Tel +39 (0)434 420160 · Fax +39 (0)434 420161...
Page 14
Connect the water line to the threaded connection at the base of the unit, as in gure Fit the other end of the hose to the water tap, use the gaskets provided in the Owner’s Kit 12 www.fhiaba.com · info@fhiaba.com · Tel +39 (0)434 420160 · Fax +39 (0)434 420161...
Then adjust the height of the rear wheels by turning the front adjusting bolts clockwise or anticlockwise as it may be required. Remount the bottom plinth or grille. www.fhiaba.com · info@fhiaba.com · Tel +39 (0)434 420160 · Fax +39 (0)434 420161...
Trace, a line dividing the panel width in half Starting form the Bottom edge of the panel, mark the positioning of the brackets Following the corresponding table, mark the external and then the internal hole www.fhiaba.com · info@fhiaba.com · Tel +39 (0)434 420160 · Fax +39 (0)434 420161...
Page 17
. The support bracket faces the opposite way (note imgs 4 and 8). www.fhiaba.com · info@fhiaba.com · Tel +39 (0)434 420160 · Fax +39 (0)434 420161...
644 mm (25 3/8”) 494 mm (19 5/8”) Distance between xing points 340 mm (13 3/8”) 900 mm (35 1/2”) 480 mm (18 7/8”) 490 mm (19 1/4”) Series www.fhiaba.com · info@fhiaba.com · Tel +39 (0)434 420160 · Fax +39 (0)434 420161...
Once the front panel has been adjusted, check that the gasket has been repositioned correctly to assure the door/drawer are closing correctly and avoid operational errors of the unit. www.fhiaba.com · info@fhiaba.com · Tel +39 (0)434 420160 · Fax +39 (0)434 420161...
Page 26
Once the front panel has been adjusted, check that the gasket has been repositioned correctly to assure the door/drawer are closing correctly and avoid operational errors of the unit. www.fhiaba.com · info@fhiaba.com · Tel +39 (0)434 420160 · Fax +39 (0)434 420161...
Page 27
Side pro les mounting 6,5 (¼”) 6,5 (¼”) Wall Appliance Wall furniture furniture 22 (7⁄ 8 ”) 22 (7⁄ 8 ”) A Connecting element B Alluminium frame www.fhiaba.com · info@fhiaba.com · Tel +39 (0)434 420160 · Fax +39 (0)434 420161...
Page 28
Attach the bracket on top of the units as per gure Finish off by mounting the central cover frame onto the central profiles, by pushing it until a click is heard www.fhiaba.com · info@fhiaba.com · Tel +39 (0)434 420160 · Fax +39 (0)434 420161...
Page 29
13 (½”) Appliance furniture furniture 44,4 (1 ¾”) 22 (7⁄ 8 ”) 22 (7⁄ 8 ”) A Connecting element D Connecting element B Alluminium frame E Aluminium frame www.fhiaba.com · info@fhiaba.com · Tel +39 (0)434 420160 · Fax +39 (0)434 420161...
Attach the bracket on top of the units as per gure Finish off by mounting the central cover frame onto the central profiles, by pushing it until a click is heard www.fhiaba.com · info@fhiaba.com · Tel +39 (0)434 420160 · Fax +39 (0)434 420161...
Page 31
22 (7⁄ 8 ”) 22 (7⁄ 8 ”) 44,4 (1 ¾”) D Central Connection H Side panel E Central covering and connection system G Lateral connecting element www.fhiaba.com · info@fhiaba.com · Tel +39 (0)434 420160 · Fax +39 (0)434 420161...
Reposition the bracket and x it rst to the cabinet and then to the wall To avoid danger of the appliance tipping over it is mandatory to secure the appliance to the wall by means of two special brackets. www.fhiaba.com · info@fhiaba.com · Tel +39 (0)434 420160 · Fax +39 (0)434 420161...
Page 33
Reposition the bracket and x it rst to the cabinet and then to the wall To avoid danger of the appliance tipping over it is mandatory to secure the appliance to the wall by means of two special brackets. www.fhiaba.com · info@fhiaba.com · Tel +39 (0)434 420160 · Fax +39 (0)434 420161...
Screw in the Allen screws available on the handle The screws must be tightened in by means of a 2.5 mm (1/8”) hex wrench. 32 www.fhiaba.com · info@fhiaba.com · Tel +39 (0)434 420160 · Fax +39 (0)434 420161...
899 Series 749 Series 599 Series 860 (33 7⁄8”) 740 (29 1⁄8”) 560 (22”) > 100 (4”) 10 (3⁄8”) www.fhiaba.com · info@fhiaba.com · Tel +39 (0)434 420160 · Fax +39 (0)434 420161...
Page 36
This grille should never be covered by panels or any other devices that could reduce its ef ciency. Please refer to page 5-6 to ensure correct air circulation. 34 www.fhiaba.com · info@fhiaba.com · Tel +39 (0)434 420160 · Fax +39 (0)434 420161...
Check that all adhesive tape and external or internal temporary protective devices have been removed. Check the perfect closing of the doors and the smooth sliding of the drawers and shelves. www.fhiaba.com · info@fhiaba.com · Tel +39 (0)434 420160 · Fax +39 (0)434 420161...
Crisper-Fresco control panel manual clean procedure. The innovative electronic control system designed by Fhiaba maintains constant temperature in multiple compartments and displays it on the control panel. It also allows user interaction making it possible to personalize settings of various functions and to alert the user with sound and/or visual messages should any malfunction occur in the appliance.
Page 39
Baron Industries srl is constantly researching new way to improve the features and the design of their products, therefore models are often upgraded and reviewed. Fhiaba srl Via Fiumicino, 20 · 33082 · Azzano Decimo · PN · Italy · Tel +39 0434 420160 · Fax +39 0434 420161...
Page 40
.com Info Line 800 - Fhiaba . (800-344222)