LuxaFlex RecessFix Installation

Do not damage the product when using a sharp knife to open
the packaging! Fitting screws: Use a size-2 screwdriver (PO-
ZIDRIVE) or use an electric screwdriver at it's lowest torque.
WARNING
their necks. To avoid strangulation and entanglement, keep cords out of

Clip installation

1

Adjust control height

3
For installation height from
1.5m, the tassel must be
at least 1.5m from the
height, push the tassel cap
up the cord and tie a knot
on the required height.
the knot and click the
enclosed transparent part
of the tassel on the cap.
For installation height on/
below 1.5m, the operation
length, push the tassel cap
knot as high as possible,
then cut the cord under
the knot and click the
enclosed transparent part
of the tassel on the cap.
Subject to technical changes
Installation TopFix / RecessFix [R1]

Installation

2
To lower the shade
4-A
Click
use the original screws enclosed, to prevent malfunctioning
from using too thick screw heads!
Rail installation sequence on Clips
2-A1
To raise the shade
4-B
Model
25/AU10
Product width Number of parts
2-A2

Removal

Installation and User manual