Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for LuxaFlex Duette UltraGlide
Summary of Contents for LuxaFlex Duette UltraGlide
- Page 1 LUXAFLEX DUETTE SHADES ® ® UltraGlide Lifting System ® Installation Operation •...
-
Page 2: Table Of Contents
CONTENTS Getting Started: Product View ..............1 How to Operate the Shade ..........2 Tools and Fasteners Needed .......... 3 Installation: Installation Overview ............ 4 Mount the Installation Brackets — Reveal Mount .... 5 Mount the Installation Brackets — Face Mount ....6 Mount the Installation Brackets —... -
Page 3: Getting Started
GETTING STARTED Product View Installation Brackets UltraGlide ® Standard Wand Top-Down/Bottom-Up Day/Night... -
Page 4: How To Operate The Shade
OPERATION How to Operate the Shade For smooth operation, keep the wand close to the fabric when raising and lowering the shade. To Raise: Pull the wand straight down with short strokes. To Lower the Shade Pull the wand toward the center of the shade at about a ■... -
Page 5: Tools And Fasteners Needed
GETTING STARTED Thank you for purchasing Luxaflex Duette UltraGlide Shades. With proper installation, ® ® ® operation, and care, your new shades will provide years of beauty and performance. Please thoroughly review this instruction booklet and the enclosed packing list before beginning the installation. -
Page 6: Installation
INSTALLATION Installation Overview Shade Brackets Your order will include the correct number of installation ■ Width Required brackets for your shade width, as shown in the table. 300mm – 914mm For end mounts, only two brackets are used up to the ➤... -
Page 7: Mount The Installation Brackets - Reveal Mount
INSTALLATION Mount the Installation Brackets — Inside Mount Measure 50mm from each jamb for bracket location. ■ If more than two installation brackets came with your order, space additional bracket(s) evenly ➤ between the two end brackets and mark their location. Mount into wood whenever possible. 50mm Space Evenly Space Evenly... -
Page 8: Mount The Installation Brackets - Face Mount
INSTALLATION Mount the Installation Brackets — Face Mount Center the headrail over the window opening at the desired height. Use a pencil to lightly ■ mark each end of the headrail on the mounting surface. Alternatively, measure the width of the headrail and use that width to mark the headrail ➤... - Page 9 INSTALLATION Attach the installation or extension brackets using the screws provided. ■ IMPORTANT: The front edges of the brackets must be level and aligned to each other. If using spacer blocks, first attach the installation bracket to the ■ 13mm spacer block before stacking additional spacer blocks together. Insert the legs of the installation bracket into the tabs on the ...
-
Page 10: Mount The Installation Brackets - End Mount
INSTALLATION Mount the Installation Brackets — End Mount End mount the headrail when conventional mounting techniques will not work — for example, in an arched window opening. 30mm Position the end mount brackets so that the top of the attached installation brackets are at the ■... -
Page 11: Install The Shade
INSTALLATION Install the Shade The front of the bracket fits under the groove. Fit the front channel on top of the headrail onto the front lip ■ Bracket of the installation brackets. Push the headrail up and back until it snaps into place. ■... -
Page 12: Level The Rail(S), If Necessary
INSTALLATION Level the Rail(s), If Necessary Lift the bottom rail to locate the pockets on the ■ underside of the rail. With the middle rail on Top-Down/Bottom-Up ➤ shades, the pockets are on the top side of the rail. Pocket See below for the middle rail adjustment on ➤... -
Page 13: Install The Wand
INSTALLATION Install the Wand The wand must be securely attached to the shade for proper operation. Gently pull out the bumper and threaded connector ■ until it is visible. Bumper Connector Slide the bumper away from the threaded connector. ■ CAUTION: Do not grip the bumper on top of the connector and attempt to screw on the wand at this point. -
Page 14: Operation
OPERATION Operate the Shade For smooth operation, keep the wand close to the fabric when raising and lowering the shade. To Raise: Pull the wand straight down with short strokes. To Lower the Shade Pull the wand toward the center of the shade at about a ■... -
Page 15: Troubleshooting
OPERATION Troubleshooting Problem The shade is hard to raise or lower, or will not raise or lower. Solution Make sure that the shade fabric is not caught between the installation bracket and the headrail. Check that the headrail and installation brackets are level and aligned. Shim the installation brackets to level the headrail, if necessary.
Need help?
Do you have a question about the Duette UltraGlide and is the answer not in the manual?
Questions and answers