Talaris Nvision User Manual page 56

Function Selection
5.3.1.10 Error Alarm
This function allows the machine to give 3 beeps when an error occurs. Use the
ON ( F2 ) key to turn the error alarm on and OFF (F3) key to turn it off.
NOTE: When switched ON the machine will emit two beeps if an incomplete
batch of notes are removed from the stacker.
5.3.1.11 Language
When this function is displayed, use the > (F2) or < (F3) keys to switch between
the available languages. When you have selected your language choice, press
CLOSE (F1) to accept your choice.
Each user may have their preferred language selected.
Note: Once accepted the display will be in the language selected.
5.3.1.12 Language (PRINTER)
When this function is displayed, use the > (F2) or < (F3) keys to switch between
the available languages. When you have selected your language choice, press
CLOSE (F1) to accept your choice.
All printed output will be in this language, regardless of the language selected by
the user.
5.3.1.13 Auto-Print Batch
This function allows the batch totals to be printed when the batch is complete
(providing the printer is enabled). The user may wish to disable this if the printer is
only used for printing statistics reports or grand totals. Use the ON (F2) key to turn
AUTO-PRINT BATCH on, or the OFF (F3) key to turn AUTO-PRINT BATCH off.
Page 48 of 74
Function Selection (System) (continued)
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
Model: Nvision
TP05613010 Rev. 02