Issue Splitting Of The Notes - Talaris Nvision User Manual

Process Selection
4.6.1

Issue splitting of the notes

Place a bundle of single denomination notes on the feed hopper. The machine
will start, count, and authenticate the notes. It will also separate them into stacker
pocket 1 and stacker pocket 2. You will see that all the notes in stacker pocket 1
will be of one issue, and all the notes in stacker pocket 2 will be of another issue
of the note. The display will show the notes in stacker pocket 2 on line one of the
display as CULL. Providing the stacker pocket 2 indicator lights shows a solid
green when the notes have been processed, you can press the ADD (F3) key to
add the authenticated notes to that count. This will be been done automatically if
you have selected AUTO ADD CULLS in the configuration option.
Note: If the DENOM process has also been selected and if an authentic note of a
different denomination is in stacker pocket 2, it will be shown on the display as
CULL, but the indicator light will flash green. If you wish you can add it to that
count.
Pick up the different issued notes from each stacker pocket and put to one side.
DETAIL
DETAIL
Any suspect notes in the issue splitting process will be automatically put into
stacker pocket 2 with the authenticated notes. If a suspect note does appear in
stacker pocket 2, then the indicator light will show a solid Red. Stacker pocket 1
should have a green light for a correct authenticated count.
Note: A flashing red light would indicate a suspect counterfeit note.
Page 30 of 74
Process Selection (Issue) (continued)
€ 60 3
€ 0 0
€ 40 2
ADD SPLIT
€ 70 4
€ 0 0
€ 40 2
ADD SPLIT
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
Model: Nvision
€ 0
€ 0
€ 40
CONT. DETAIL SPLIT
€ 0
€ 70
€ 40
CONT. DETAIL
REMOVE
4
0
2
0
4
2
TP05613010 Rev. 02