Advertisement
DO NOT allow children to operate the gun.
8
DO NOT direct the hot airflow toward people (including yourself), animals, or plants.
8
DO NOT use the gun in a wet environment, or areas of high humidity (i.e. bathrooms, steam rooms, etc.).
8
DO NOT use the gun in the rain or on extremely damp days.
8
DO NOT obstruct the hot airflow by blocking or covering the air outlet.
8
DO NOT touch the hot air nozzle as it becomes extremely hot.
8
DO NOT place the heat gun on any surface whilst running, except when using the gun by standing on end in an upright position.
8
DO NOT allow the gun to fall over whilst operating free standing in an upright position.
8
DO NOT leave the heat gun running unattended. Always turn the power supply oFF and DO NOT leave until the gun has cooled.
8
DO NOT use the gun for a task it is not designed to perform.
8
DO NOT use the gun in combination with chemical strippers.
8
DO NOT operate the gun when you are tired, under the influence of alcohol, drugs or intoxicating medication.
8
▲
DANGER! DO NOT USE THE HEAT GUN AS A HAIR DRYER
LEAD PAINT WARNING! Paint once contained lead as a traditional ingredient. Paint particles, resulting from the removal of such
‰
paint, are toxic and ingestion/inhalation must, therefore, be avoided. The following action must be taken before using this tool:
The operator must determine potential hazard relating to age of paint to be removed (modern paints do not have lead content).
▲
DANGER! Keep all persons and pets away from the work area. The following are particularly vulnerable to the effects of lead
paint dust: Expectant women, babies and children. We recommend personal protection by using the following safety items: Paint Spray
Respirator (Sealey ref. SSP1699), PE Coated Hooded Coverall (Sealey ref. SSP267), Latex Gloves (Sealey ref. SSP24).
Take adequate measures to contain the paint dust, flakes, and scrapings. When task is complete continue to wear safety equipment and
thoroughly clean all areas. ensure paint waste is disposed of in sealed bags or containers.
2.
INTRODUCTION
i
equipped with triple-range variable electronic temperature control. Suitable for paint stripping, soft soldering, removing sticky labels and
defrosting frozen pipes. Additionally suitable for plastic welding with optional plastic welding nozzles. Nozzles supplied separately. Gun is
designed to stand vertically, allowing use as a safe Bunsen burner alternative. Fitted BS approved 3-pin safety plug.
3.
SPECIFICATION
i
Model no.: ..........HS102.V3 HS102K.V3 (Welding kit option)
Power: ...............................................................2000W, 230V
Temperature range .............................................50
Air volume ...........................................150 / 300 / 500 ltr/min.
may be handled or
stood vertically on a
non-slip base.
4.
OPERATION
i
4.1.
PREPARING THE HOT AIR GUN FOR USE
4.1.1.
Before plugging into the mains ensure the gun is in the OFF position.
4.1.2.
When ready to commence work set power switch to desired temperature setting. Allow one and a half minutes.
4.1.3.
STANDING THE GUN ON END: Gun may be stood on end in an upright (vertical) position.
4.1.4.
ensure the surface on which you will stand the gun is flat, level, and free from dirt.
4.1.5.
HS102 balances on the end of its main body and the rubber stop on the end of the handle.
WARNING! KEEP HANDS AWAY FROM THE IMMEDIATE NOZZLE AREA. IF LEAD PAINT IS BEING REMOVED FOLLOW THE
‰
SAFETY WARNING AT THE BEGINNING OF THIS MANUAL. Always wear gloves and eye protection.
4.2.
PAINT AND VARNISH REMOVAL
4.2.1.
The easy removal of paint and varnish requires practice. Follow these simple working techniques to achieve the required result.
NOTE: The heat gun is designed to remove both oil and latex based paints and varnishes from surfaces. It will not remove stains
or primer coats that have impregnated the surface of the wood.
4.2.2.
Switch the gun on and allow it to reach its operating temperature.
© Jack Sealey limited
C - 600
C
o
o
Original Language Version
Temperature
Regulator
On/Off & Fan
Speed Switch
Reference data for above Welding Kit:
1. HS102K/1 Plastic Welding Rods (ABS)
2. HS102K/2 Plastic Welding Nozzle
3. HS102K/3 9mm Reduction Nozzle
HS102.V3 & HS102K.V3 Issue 2 (1)
fig.1
30/09/19
Advertisement
