HP AdvanceStack Switch 2000 Quick Reference page 8

UTP Ethernet/10Base-T Connectivity
Switch 2000 to Switch 200
Switch 2000 to Router 650
Note: As shown in this illustration,
a straight-through cable is used to
connect the Router 650 to a built-in
RJ-45 port in the Switch 2000 Ether-
net module. If the connection from
the Router 650 is to a 10Base-T
transceiver in the Switch 2000
Ethernet module, use a crossover
cable instead.
8
Crossover Cable
Straight-Through Cable