Automatic Channel Setting - Philips VR1010/75 User Manual

Automatic Channel Setting

Before using the VCR, you need to
set the tuner channels. Follow the
procedures described below.
For Australia customers only:
This VCR is factory pretuned to
Australian capital city 2, 7, 9, 10 and
28. Do not perform this task unless you
are outside of capital city reception
area.
1
Select Tuner Set Up Mode
1 Press MENU.
5
2 Press PLAY or
∞
CHANGING TUNER SET UP
STOP to AUTO TUNER SET UP
select "TUNER
SET UP" then
SELECT:
END: MENU
press OK/STATUS.
2
Start Auto Programming
5
1 Press PLAY or STOP
"AUTO TUNER SET UP" then press
OK/STATUS.
The TV system selecting menu
appears on the TV.
5
2 Press PLAY or STOP
the appropriate TV system of your
residential area.
SYS COUNTRY
B/G W.EUR. ASEAN AUST.
NZ
D/K CHINA RUS. E.EUR.
I HK S.AF. UK
M USA CAN. MEX. JPN
LATIN AM. KOR. TWN
PHIL.
SELECT: CONFIRM: OK
END: MENU
B/G : For West Europe, ASEAN
countries, Australia, New
Zealand.
D/K : For China, Russia, East
Europe.
I : For Hong Kong, South Africa,
United Kingdom.
M : For USA, Canada, Mexico,
Japan, Latin America, Korea,
Taiwan, the Phillipines.
3 Press OK/STATUS.
Auto programming starts.
The local channels receivable in your
area are automatically
programmed in the VCR's tuner.
While the auto programming is
carried out
The following message appears on the
TV screen.
AUTO CH.SET PROCEEDING
PLEASE WAIT
START FINISH
vr1010/75
When the auto programming is
completed
The following message appears on the
TV screen, and the lowest channel will
be tuned in.
AUTO CH. SET COMPLETED
If you want to delete
unwanted channels
You can delete channels manually.
After you have deleted the channels,
they will be not selected by pressing
5 ∞
CH / .
1 Press VCR.
2 Press MENU.
CONFIRM: OK
3 Press PLAY
∞
STOP
to select
"TUNER SET UP"
∞
then press OK/STATUS.
to select
4 Press PLAY
"CHANGING TUNER SET UP"
then press OK/STATUS.
The programmed channel informa-
∞
tion list appears with the settings of
to select
the tuned channel flashing. (You can
also watch the picture of the tuned
channel since the list and the picture
alternates on the TV.)
5 Press PLAY
unwanted channel setting flashes.
6 Press CLEAR to delete the unwanted
channel.
• If you have accidentally deleted a
channel, press REW
7 Repeat steps 5 and 6 until you delete
all unwanted channels.
8 Press MENU to exit from the menu
operations.
If you want to exchange the
channel positions
You can also replace the channel
position numbers.
EX. Replace channel 9 and channel 3
1 Press VCR.
2 Press MENU.
3 Press PLAY
"TUNER SET UP" then press
OK/STATUS.
4 Press PLAY
"CHANGING TUNER SET UP"
then press OK/STATUS.
5 Press PLAY
information for channel 3 flashes.
6 Press OK/STATUS once.
Only channel indication for channel
3 starts flashing.
11
7 Press 0 then 9.
• If you have accidentally deleted a
8 Press OK/STATUS to store the
9 Press MENU to exit from the menu
If the picture is not clear
You need to fine-tune this particular
channel.
EX. Fine-tune channel 3
1 Press VCR.
2 Press MENU.
CH FRQ SYS CH FRQ SYS 3 Press PLAY
01 150 BG 07 229 BG
02 165 BG 08 237 BG
03 195 BG 09 355 BG
5
04 205 BG 10 365 BG
or 05 213 BG 11 374 BG
∞
06 221 BG 12 384 BG
4 Press PLAY
SELECT: DELETE: CLEAR
CHANGE CH: OK
END: MENU
5 ∞
5 Press PLAY
or STOP to select
6 Press OK/STATUS twice.
7 Press PLAY
8 Press OK/STATUS to store the
5 ∞
or STOP until an
9 Press MENU to exit from the menu
If no sound comes out
You need to change the TV system for
2
this particular channel.
.
EX. Change the TV system for
channel 3
1 Press VCR.
2 Press MENU.
3 Press PLAY
4 Press PLAY
5 Press PLAY
5 ∞
6 Press OK/STATUS three times.
or STOP to select
5 ∞
7 Press PLAY
or STOP
to select
5 ∞
8 Press OK/STATUS to store the
or STOP
until
9 Press MENU to exit from the menu
— 11 —
00.6.29, 4:53 PM
The channel settings for channel 3
and 9 are exchanged.
2
channel, press REW .
setting.
operations.
5 ∞
or STOP
to select
"TUNER SET UP" then press
OK/STATUS.
5 ∞
or STOP
to select
"CHANGING TUNER SET UP"
then press OK/STATUS.
5 ∞
or STOP
until
information for channel 3 flashes.
Only frequency indication for
channel 3 starts flashing.
5 ∞
or STOP to fine-
tune the station until you get the best
possible picture.
setting.
operations.
5 ∞
or STOP
to select
"TUNER SET UP" then press
OK/STATUS.
5 ∞
or STOP to select
"CHANGING TUNER SET UP"
then press OK/STATUS.
5 ∞
or STOP
until
information for channel 3 flashes.
Only TV system indication for
channel 3 starts flashing.
5 ∞
or STOP
to select
the appropriate TV system [(BG,
DK, I, M)] so that sound comes out.
setting.
operations.