Table of Contents
Advertisement
18 Remote Control Buttons
Press to turn on or off the VCR or a Magnavox, Philips, or Philips
Magnavox TV. (You must first press the VCR or TV button.)
Press to access the VCR menu. Or, if you have a Magnavox, Philips,
or Philips Magnavox TV, press the TV button, then press the MENU
Press to select channels at the VCR or at a Magnavox, Philips, or Philips
Magnavox TV; use to set up VCR features (such as the clock).
Enter channel numbers as a two-digit number for the quickest results.
For example, to select channel 6, press 0,6. If you only press the
Number 6 button, channel 6 will be selected after a brief delay. (There
also may be a brief delay when you select channels 10, 11, and 12.) If
you want to select channels 100 and above, enter channel numbers as a
three-digit number. For example, to select channel 117, press 1, 1, 7.
Enter channel numbers as a two-digit number for the quickest results.
You may only select channels 2-69. For example, to select channel 5,
press 0,5. If you only press the Number 5 button, channel 5 will be
Press to memorize a tape position at which the real-time counter was
Press once to start a recording. Details are on page 25. Or, press
repeatedly to start a One-Touch Recording. Details are on page 27.
Press to play a tape; press to release Search or Still mode and return
to normal playback. Details are on page 35. Press to select an item in
the VCR's on-screen menu. Or, if you have a Magnavox, Philips, or
Philips Magnavox TV, press when in TV mode to move up one row
Press to eliminate the sound at a Magnavox, Philips, or Philips
Magnavox TV. Press again to restore the volume. If you mute the vol-
ume, pressing the VOL(ume)
Press to operate the VCR with the remote control.
Press to adjust the volume of a Magnavox, Philips, or Philips Magnavox TV.
While recording, press to temporarily stop the recording (pause). Press a
second time to resume normal recording. Details are on page 25.
During playback, press to freeze the picture (still). Each time you press the
PAUSE/STILL button, the noise lines will change position on the screen. To
resume playback, press the PLAY/
• Press the VCR button before pressing VCR feature buttons; press the TV button before pressing TV feature but-
tons if you have a Magnavox, Philips, or Philips Magnavox TV.
• Buttons that are shaded in the illustration will glow for some time after exposure to direct light.
POWER Button
Press to eject the tape.
button to display the TV menu.
Number Buttons
Antenna Users
selected after a brief delay.
MEMORY Button
set to 0:00:00. Details are on page 34.
REC(ord)/OTR Button
PLAY/o Button
or selection in the TV menu.
o button also will restore the volume.
VOL(ume)
PAUSE/STILL Button
You can not pause a One-Touch Recording.
o button. Details are on page 35.
Helpful Hints
EJECT Button
MENU Button
Cable Users
MUTE Button
VCR Button
o/p Buttons
EJECT
POWER
MENU
CLEAR
STATUS/EXIT
1
2
3
4
5
6
7
8
9
MEMORY
ALT.CH
0
REC
PAUSE
/OTR
/STILL
PLAY
REW
F.FWD
STOP
CH.
VOL.
MUTE
VCR
TV
VCR/TV
SPEED
Advertisement
Table of Contents
