aci TUCH2 Installation Instructions Manual
Microprocessor based humidity sensor with temperature option
Hide thumbs
Also See for TUCH2:
- Installation instructions manual (9 pages) ,
- Installation & operation instructions (7 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for aci TUCH2
Summary of Contents for aci TUCH2
-
Page 3: Model Series
The TUCH2 supports relative humidity output in all standard analog signals at 2%, 3%, or 5% accuracy. A setup menu provides easy output and display configuration changes. - Page 4 1. TUC2 units do not have RH or RHS terminal locations loaded. 2. If your TUC2 or TUCH2 has any output configured with a 10V or Current output, the voltage at the +V terminal must be at least +18 VDC.
-
Page 5: Front View
- +12 to +40 VDC or 20 to 28 VAC COM - Ground or signal common, 20 to 28 VAC - Temperature sensor signal to controller - Temperature set point signal to controller - Override signal to controller - Fan signal to controller OFB - Occupied feedback signal from controller - 3.5mm phone jack ring / Digital input or output - 3.5mm phone jack tip / Digital input or output... -
Page 6: Operation
WIRE NUMBER: COLOR: PIN 1 3.5mm Stereo Jack Attach the required wires to the proper terminal locations. The TUC2 or TUCH2 supports three signal wires, ring, tip, and shield. The number of wires needed depends on the application. Ring Shield... -
Page 7: Normal Mode
Normal Mode The LCD can display temperature, RH, occupied status, system mode, and fan mode. The display configuration can be setup when ordered or changed through the setup menu. The backlight will turn on when the any key is pressed and will turn off 10 seconds after the last key press. -
Page 8: Setup Mode
Fan/System Mode Press to change the fan or system setting. The fan or system setting will start blinking after is pressed. Press to switch between the fan and system modes. The mode that is blinking will change when is pressed. Press to return to normal operation. - Page 9 Temperature Menu RH Menu Display Menu Fan Menu System Menu Additinal Options Menu RH Options Fan Options Temperature Options Display Options System Options Additional Options Degrees F or C RH Offset Display Setup Fan On or Off System On or Off Setup Lockout Changes the temp.
-
Page 10: Specifications
RoHS, REACH Warranty Statement The A/TUC2 Series and the A/TUCH2 Series are covered by ACI’s Five (5) Year Limited Warranty, which is located in the front of ACI’s SENSORS AND TRANSMITTERS CATALOG or can be found on ACI’s web site, which is: www.workaci.com...