Table of Contents
Advertisement
Configuration → Using test.commander
5
84
firm any changes to be made in order to retain the current
state.
3. A dialog finally shows you that all settings have been success-
fully read from the Test Controller. Acknowledge this with a
click on OK.
In your project the selected Test Controller is now displayed as
the main entry. A tree structure similar to that in Windows
Explorer shows the connected (found) Q.bloxx modules and the
variables used. Open up the entries as required by a click on
Mark a module and select Configuration from the context menu
or double click on a module or signal (variable) to start the con-
figuration program ICP 100. Then carry out all the module set-
tings in the window of this program.
IMPORTANT
After changes to the configuration of modules or a Test Con-
troller
is displayed in the project tree. Select
Write Project (Update) in the test.commander to update the
settings in the project (and in the Test Controller). The project
file is in this case automatically saved.
Tip
Edit the complete variable definition in the configuration dialog
by clicking on the variable in the leftmost column (the column
contains the variable number Vx). This marks the variable defini-
tion. Then use the context menu to cut, copy, overwrite with a
previously copied one, paste or delete the variable.
.
or File >
Vers. No. 4.0
Released: 5/12/2011
Advertisement
Table of Contents
