Safety Information - Bosch RDH 1810 Installation And Operating Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

2 | English

Safety information

This appliance is intended for domestic use
or for household-based, non-commercial
applications. Household-based applications
include, e.g. usage in employees catering
facilities for shops, offices, agricultural and
other commercial operations, as well as
usage by guests of guest houses, small ho-
tels and similar residential establishments.
Risk of electric shock!
Switch off the mains voltage supply
immediately if a fault occurs.
We do not accept liability for damage
resulting from failure to heed these
instructions.
The continuous-flow heater may only
be connected and put into operation
by a qualified professional.
Never open the appliance without
disconnecting the power supply
beforehand.
The statutory regulations of the respec-
tive country, as well as those of the lo-
cal electricity and water suppliers, must
be adhered to.
The continuous-flow heater is a Class I
appliance and must be connected to the
protective earth.
The appliance must be permanently
connected to installed pipes. The con-
ductor cross-section must comply with
the installed appliance power.
Caution: Earthed water pipes may give
the appearance of a connected protec-
tive earth.
To guarantee compliance to relevant
safety regulations, an all-pole separator
must be fitted during installation. The
contact opening must be at least 3 mm.
The continuous-flow heater is only suit-
able for closed (pressurized) operation.
The tap and outlet fittings must be ap-
proved for operation with closed (pres-
surized) continuous-flow heater systems.
Only connect the continuous-flow heater
to a cold water line. A non-return valve
must NOT be connected to the cold
water.
9 000 913 849 | (28.10.13)
Do not use plastic pipes. Steel or copper
pipes are suitable for the cold-water sup-
ply. Insulated copper pipes are particu-
larly suitable for the hot-water pipes.
The continuous-flow heater may only
be installed in a frost-free room. It
should be installed close to the tap
that is used the most frequently.
The dismounted appliance must be
stored in a frost-free area (residual wa-
ter) and may not be subjected to frost.
Disconnect the electrical connection
cable from the supply and shut off the
water supply before connecting the
appliance!
Connect the water supply and then
connect the electrical supply.
Only make the openings which are re-
quired for installation on the rear of the
appliance. If the appliance is reinstalled,
the unused openings must be provided
with watertight sealing.
Do not touch electrically live parts after
installation.
This appliance can be used by children
aged 8 years and older as well as by per-
sons with diminished bodily, sensory or
mental perception, or those who lack
knowledge or experience, if they are
monitored or have received instruction
concerning use and comprehend the pos-
sible dangers that can result. Children
may not play with the appliance. Cleaning
and maintenance by the user may not be
performed by unsupervised children.
Keep children away from the appliance.
Please monitor children to ensure that
they do not play with the appliance.
The mixer and the warm water pipe may
be hot. Please inform and instruct chil-
dren appropriately.
Please switch off all fuses immediately
with a malfunction. Immediately shut off
the cold water supply to the appliance
should it leak. The malfunction can only
be repaired by factory service or an au-
thorised service agent.
Do not use aggressive or abrasive clean-
ing detergents!
Do not use a steam cleaner.
Robert Bosch Hausgeräte GmbH

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rdh 2110Rdh 2410

Table of Contents