Advertisement
Step 4:
• Mount the bracket assembly to the ceiling with 4
sets of long screws and washers (10 ,11 in Use &
Care Guide ).
Make sure the power cable for the range hood is
routed inside the bracket.
Step 5:
•
Attach the exhaust duct. In the example below,
round metal duct furnace pipe has been used.
Add the duct tape to the metal duct furnace pipe
to insure a tight connection.
Step 6:
•
Fix the extension chimney on extension bracket
Place the lower and upper chimney on the bracket
•
assembly, and hold it up with screwdriver
(fig.
)
5
fig. 5
Step 7:
• Push the range hood onto the lower bracket. And
fix them with 4 sets of nuts , span washers and
washers (13,14 and 15 in the Use & Care Guide.)
Step 8:
• Connect the power cord
•
Connect the duct pipe to the collar
Step 9:
• Pull down the lower chimney
Fix the upper and lower chimney with 4 short
•
screws
2
Advertisement
