No MIDI Output from TUSB Interface
The Function and Key Adj lights are alternately flashing.
Alternately flashing Function and Key Adj lights indicate that a ribbon cable is disconnected or
plugged in upside-down at either the TUSB interface or the cable coupler. At the TUSB, the silver
-contact side is toward the bottom of the TUSB box. At the cable coupler, the silver-contact side
of the cables should face the circuit board.
The Key Adj light is flashes steadily.
The system is in Mute Mode
The PWR light is red
Indicates a USB failure - Call your dealer or QRS Technical Support
QRS Part #
Description
50126
USB A Male - 5 Pin Mini B
7921701
AC Power Adapter
Input: 100-240 V / 50-60 Hz 0.2A
Output: 5V DC 1.0A / Center Positive
Go to http://www.epiano.com/qrs/index.php
QRS Music Technologies, Inc. / Technical Support - 800-247-6557 / www.qrsmusic.com
P N O s c a n I I I Us e r G u i d e
P N O s c a n I I I Us e r G u i d e
P N O s c a n I I I Us e r G u i d e
Troubleshooting
Accessories
Educational Piano Software
Purpose
Connects PNOscan III to a computer.
Required whenever using the MIDI Output.
Not necessary when connected to a computer
via a USB cable.
9