Operating Modes [Pnoscan Tusb] - QRS Music Technologies PNOscan III User Manual

TUSB
Repeatedly tap the Key Adj button to select one of the following Patch Changes:
The voices below are not internal to the PNOscan III. PNOscan III is sending "patch change"
messages to the device connected to the MIDI OUT port of the TUSB.
1. Preset 1 - Patch Change 1 = Grand Piano - Light blinks once, then a pause.
2. Preset 2 - Patch Change 5 = Electric Piano - Light blinks twice, then a pause.
3. Preset 3 - Patch Change 20 = Church Organ - Light blinks tree times, then a pause.
4. Preset 4 - Patch Change 51 = String Ensemble 2 - Light blinks four times, then a pause.
Tapping the Power button places the unit in System Mute mode:
Your MIDI Sound Module
If you are installing the PNOscan in a PNO
10-pin ribbon cable into the "PNOscan IO" port on the PNO
PNO 3 software.
QRS Music Technologies, Inc. / Technical Support - 800-247-6557 / www.qrsmusic.com
4
P N O s c a n I I I Us e r G u i d e P N O s c a n I I I Us e r G u i d e P N O s c a n I I I Us e r G u i d e
Operating Modes
3 playback system you don't need the TUSB box. Just plug the
3 processor. Record setup is done in the