Meyer EZ-SWEEP Mounting Manual

PARTS & INSTALLATION INSTRUCTIONS
MEYER EZ - SWEEP MOUNTING
Vehicles with EZ-Sweeps installed may be so equipped as to meet vehicle manufacturers' specifications and recommended
options. Most vehicle manufacturers insist that vehicles which are to be used for brooming be equipped with certain options
and accessories, and it is so stated in vehicle manufacturer specifications for snow plow application.
INSTALL A SNOW PLOW ON A VEHICLE THAT IS NOT RECOMMENDED FOR SNOW PLOW APPLICATION BY THE
VEHICLE MANUFACTURER. DOING SO MAY BE DANGEROUS AND WILL VOID THE MEYER / DIAMOND WARRANTY.
PLEASE CONTACT YOUR VEHICLE MANUFACTURER, MEYER PRODUCTS, OR YOUR NEAREST AUTHORIZED
MEYER OR DIAMOND DISTRIBUTOR IF YOU HAVE ANY QUESTIONS ABOUT APPLICATIONS.
Warning: Lift Arm extends beyond bumper of vehicle. To minimize damage from a front-end collision, Lift Arm
should be removed from vehicle when Broom is removed.
Item
1
2
3
4
5
6
7
8
9
1 0
1 1
1 2
1 3
1 4
1 5
1 6
1 7
1 8
1 9
2 0
2 1
2 2
2 3
2 4
Parts indented are included in the carton, bag or assembly under which they are indented. When ordering parts, furnish
Part No., Name, and Description. Also furnish Vehicle Model and Year. Type of Hydraulic Unit and Moldboard Size.
Meyer Products reserves the right, under its continuing product improvement program, to change construction or design
details, specifications and prices without notice or without incurring any obligation.
© 1998 Printed in the U.S.A.
CLOSE WINDOW
1997 DODGE DAKOTA 4X4
IMPORTANT NOTICE
PARTS LIST
Part No. Qty. Description
1 8 0 8 1 1 Mounting Carton
1 1 5 6 0 1 • Clevis Frame
1 1 5 6 4 1 • Support Frame
1 0 5 1 4 1 • Lift Arm
1 1 4 6 2 2 • Reciever Tube Caps
0 8 6 2 6 1
1 1 3 6 8 2
2 0 0 9 5 2
2 0 3 0 7 2
0 8 6 7 9 1
1 1 0 0 6 2
1 4 5 9 5 2
2 0 0 9 5 8
2 0 1 4 4 1
2 0 1 4 6 2
2 0 3 0 7 8
2 0 3 0 9 3
2 0 3 1 0 2
2 0 3 5 5 1 6
2 0 3 5 9 2
2 1 9 8 4 2
1 1 2 7 5 1 Lift Frame (Tubular)
1 6 5 1 0 1 Pivot Bar - A-Frame Carton
1 3 5 9 4 1 • A-Frame
1 2 2 1 6 1 • Pivot Bar
0 8 7 0 9 1 • A-Frame Stand Kit
08704 1 •• Hardware Bag
1 3 5 9 1 1 •• King Bolt W/Grease Fitting
2 0 3 0 9 1 •• Locknut 5/8-11
1 1 1 0 6 2 •• Hinge Pin
2 2 0 8 3 2 •• Linch Pin
0 7 9 9 6 1 •• Cable Tie
• Kit Light Elevation
•• Bracket
•• Bolt 1/2-13 x 1-1/2" Gr.5
•• Locknut Esna 1/2-13
• Hardware Bag
•• Hinge Pin
•• Special Bolt 3/4"
•• Bolt H 1/2-13 x 1-1/2"
•• Bolt H 5/8-11 x 2-3/4" Gr. 5
•• Bolt H 5/8-11 x 3-1/4" Gr. 5
•• Locknut Esna 1/2-13
•• Locknut Esna 5/8-11
•• Locknut Esna 3/4-10
•• Flatwasher 1/2"
•• Flatwasher 3/4"
•• Hair Pin Cotter
18513 Euclid Ave. • Cleveland, Ohio 44112-1084
Phone 486-1313 (Area Code 216)
Form 1-691
August, 1998
WARNING: DO NOT
Gr. 5