Pioneer GM-3500T/XZUC Service Manual page 4

1
6. When you replace a part fixed to the heatsink (Q138, Q141, Q142, D6, D7, Q238, Q241, Q242, Q7 and Q8),
A
adjust the position of the part according to the following.
B
C
D
E
Note : Even if the unit shown in the photos and illustrations in this manual may differ from your product, the procedures
described here are common.
F
4
1
2
Put the Amp Unit on blocks.
Put a paper between the block and the Amp Unit,
and outline transistors and diodes.
Put a part to replace in the outline.
Align the bottom of a transistor or a diode with the
top of the PC board, and solder it.
Apply grease, GEM1057 to the back of the part.
GM-3500T/XZUC
2
3
3
4
4