Specifications - Philips FWM352/BK User Manual

AMPLIFIER
Output power
for FWM371 ........................................... 2400W PMPO
.................................................................... 2 x 60 W RMS
for FWM352 ........................................... 1200W PMPO
..................................................................... 2 x 30W RMS
Signal-to-noise ratio .......................... ≥ 60 dBA (IEC)
Frequency response ....................... 125 – 16000 Hz
Input sensitivity
AUX/CDR In ..................................................... 500 mV
Microphone .......................................................... 3.5 mV
Output
Speakers .................................................................... ≥ 6 Ω
Headphones ............................................................. 32 Ω
(1) (6 Ω, 1 kHz, 10% THD)
CD/MP3-CD PLAYER
Number of programmable tracks ......................... 40
Frequency response .......... 125 – 16000 Hz -3dB
Signal-to-noise ratio ....................................... ≥ 75 dBA
Channel separation
for FWM371 ........................................ ≥ 55 dB (1 kHz)
for FWM352 ........................................ ≥ 50 dB (1 kHz)
Total harmonic distortion ................................. < 0.6%
MPEG 1 Layer 3 (MP3-CD) .......... MPEG AUDIO
MP3-CD bit rate ....................................... 32-256 kbps
Sampling frequencies ....................... 32, 44.1, 48 kHz
TUNER
FM wave range ................................... 87.5 – 108 MHz
MW wave range (9 kHz) ............. 531 – 1602 kHz
MW wave range (10 kHz) ........... 530 – 1700 kHz
Tuning grid ............................................................ 9/10 kHz
Number of presets ........................................................ 40
Antenna
FM ....................................................................... 75 Ω wire
MW ............................................................ Loop antenna
(1)
(1)
(128 kbps advised)

Specifications

TAPE PLAYER
Frequency response
Normal tape (type I) ...... 125 – 8000 Hz (8 dB)
Signal-to-noise ratio
Normal tape (type I) ................................. ≥ 40 dBA
Wow and flutter .............................................. ≤ 0.4% JIS
SPEAKERS
System 1-way; 1 port bass reflex
Impedance ........................................................................ 6 Ω
Woofer ................................................................... 1 x 5.25"
Tweeter .......................................................................... 1 x 2"
Dimensions (w x h x d) . 222 x 310 x 220 (mm)
Weight ................................................................ 2.9 kg each
GENERAL
Material/finish ................................... Polystyrene/Metal
AC Power ............................ 110 – 127 / 220 – 240 V;
....................................................... 50/60 Hz Switchable
Power Consumption
Active
for FWM371 .......................................................... 80 W
for FWM352 .......................................................... 70 W
Standby .................................................................. ≤ 15 W
Dimensions (w x h x d) .. 265 x 310 x 384 (mm)
Weight (without speakers)
for FWM371 .............................................................. 6.4 kg
for FWM352 .............................................................. 5.5 kg
Specifications and external appearance are
subject to change without notice.
25