The remote control does not function
properly.
The time is not working.
Not all lighted buttons are showing light.
The Clock/Timer setting is erased.
Troubleshooting
✔
Select the source (CD or TUNER, for example)
before pressing the function button (É,í,ë).
✔
Reduce the distance between the remote
control and the system.
✔
Insert the batteries with their polarities
(+/– signs) aligned as indicated.
✔
Replace the batteries.
✔
Point the remote control directly towards the IR
sensor.
✔
Set the clock correctly.
✔
Press and hold TIMER ON/OFF to switch on the
timer.
✔
If recording or tape dubbing is in progress, stop
recording.
✔
Press DIM to select DIM OFF display mode.
✔
Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
27