642
8-2. Customization
Rear sunshade
■
Function
Reverse operation
Time elapsed before the
reverse operation feature
activates
*
: If equipped
Vehicle customization
■
When the speed linked door locking function and shift position linked door locking
●
function are both on, the door lock operates as follows.
• When shifting the shift lever to any position other than P, all the doors will be locked.
• If the vehicle is started with all the doors locked, the speed linked door locking func-
tion would not operate.
• If the vehicle is started with any door unlocked, the speed linked door locking func-
tion will operate.
When the smart entry & start system is off, the selecting door to unlock cannot be cus-
●
tomized.
When the doors remain closed after unlocking the doors and the automatic door lock
●
function (time elapsed before the automatic door lock function is activated if a door is
not opened after being unlocked) activates, the signals will be generated in accordance
with the operation signal (buzzers) and the operation signal (emergency flashers) set-
tings.
Some settings can be changed using a switch or the Remote Touch screen. If a setting is
●
changed using a switch, the changed setting will not be reflected on the Remote Touch
screen until the engine switch is turned off and then to IGNITION ON mode.
When customizing using the Remote Touch
■
Stop the vehicle in a safe place, apply the parking brake, and shift the shift lever to P. Also,
to prevent battery discharge, leave the engine running while customizing the features.
WARNING
During customization
■
As the engine needs to be running during customization, ensure that the vehicle is
parked in a place with adequate ventilation. In a closed area such as a garage, exhaust
gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This
may lead to death or a serious health hazard.
GS350_300_GS F_OM_OM30J17E_(GE)
*
(P. 411)
Default setting
On
0.7 seconds
Customized
1
2
setting
Off
—
—
0 second
0.9 seconds
—
—
1.2 seconds
3
O
O