G-force display
■
The G-force values may not be zero even when the vehicle is parked, such as when it is
●
parked on an incline.
Depending on the vehicle usage conditions, the brake fluid pressure display may not
●
reach its maximum reading even though the brake pedal is fully depressed.
If a battery terminal is disconnected and reconnected, the steering amount display may
●
be disabled temporarily. After driving the vehicle for a while, the display will be enabled.
System check display
■
After turning the engine switch to IGNITION ON mode, opening image is displayed
while system operation is checked. When the system check is complete, the normal
screen will return.
Suspension of the settings display
■
In the following situations, the settings display using the meter control switches will be
suspended.
When a warning message appears on the multi-information display
●
When the vehicle begins to move
●
Tire inflation pressure (if equipped)
■
It may take a few minutes to display the tire inflation pressure after the engine switch is
●
turned to IGNITION ON mode. It may also take a few minutes to display the tire infla-
tion pressure after inflation pressure has been adjusted.
"---" may be displayed if the tire information cannot be determined due to unfavorable
●
radio wave conditions.
Tire inflation pressure changes with temperature. The displayed values may also be dif-
●
ferent from the values measured using a tire pressure gauge.
When disconnecting and reconnecting battery terminals
■
The drive information will be reset.
Liquid crystal display
■
P. 107
GS350_300_GS F_OM_OM30J17E_(GE)
2. Instrument cluster
123
2