1. Manuals
  2. Brands
  3. MAKINEX Manuals
  4. Music Mixer
  5. MS-100
  6. Operator's manual

MAKINEX MS-100 Operator's Manual

Hide thumbs Also See for MS-100:
Table of Contents

Advertisement

Quick Links

Download this manual
MIXING STATION
MS-100
OPERATOR'S MANUAL
Rev 0919

Advertisement

Table of Contents
loading

Related Manuals for MAKINEX MS-100

Summary of Contents for MAKINEX MS-100

  • Page 1 MIXING STATION MS-100 OPERATOR’S MANUAL Rev 0919...

  • Page 2: Table Of Contents

    PRODUCT DESCRIPTION AND SPECIFICATION ................4 INSTRUCTIONS FOR USE ......................... 5 STEP 1 – FITTING A STIRRER/ MIXER TO THE MS-100 ............... 5 STEP 2 – USING THE MS-100 ......................7 STEP 3 – POURING AND PLACING LEVELLING COMPOUND ............. 8 STEP 4 –...

  • Page 3: Introduction

    Keep this manual or a copy of it with the machine. If you lose this manual or need an additional copy, please contact MAKINEX. This machine is designed and built with user safety in mind; however, it can present hazards if improperly operated and serviced. If there are any questions regarding operating or servicing of this machine, please contact MAKINEX.

  • Page 4: About This Manual

    Ensure you read all information contained in this manual before using the READ MS-100. CAREFULLY Ensure you read the User Manual and safety instructions for the MS-100 and other components that are part of this unit. READ See Appendix for more information.

  • Page 5: Safety Decals

    SAFETY DECALS There is a safety and information panel provided on the Clamp Arm (see images below) of the MS-100 to alert the user of potential safety risks/hazards. Please read and adhere to all instructions on the Unit. It is forbidden to remove any safety or instructional stickers or panels from the MS-100.

  • Page 6: Product Description And Specification

    A MS-100 mixing station can mix up to 80kg (176lbs) in 3 minutes, which can equate to 1 Tonne per hour. MS-100 is ultra-lightweight for easy transportation and the ergonomic design with easy-tilt operation provides control and speed for precision pouring.

  • Page 7: Instructions For Use

    Materials and Substances. WARNING ALWAYS ensure that the work place is well ventilated. CAUTION STEP 1 – FITTING A STIRRER/ MIXER TO THE MS-100 Ensure the Stirrer/Mixer is disconnected from mains power before Attaching or Removing it to/from the MS-100 frame. WARNING NEVER place hand under ‘Slider Clamp’...
  • Page 8 3. Attach MS-100 ‘Clamp Arm’ into the ‘Slide Arm Collar’ of the MS-100 Frame; tighten ‘Collar Latch’ in place. Clamp Arm Collar Latch Slide Arm Collar 4. When fitting a mixer, make sure the ‘Slider Clamp’ opened, fit it through the gap from the front end and then position the collar part of the mixer between the ‘SL clamp and tighten.

  • Page 9: Step 2 - Using The Ms-100

    ALWAYS disconnect Stirrer/Mixer from mains power before placing WARNING hands into the Bucket. ALWAYS ensure the Stirrer/Mixer is switched OFF before plugging it in. ALWAYS wind-up the Power Cord before moving the MS-100. ALWAYS be aware of the Power/Extension Cord position when working WARNING around the MS-100™.
  • Page 10 Mixer. down Variable Speed Dial to ‘1’ and switch ‘OFF’ Stirrer at the Trigger. 15. Unplug Stirrer/Mixer from Power Supply; wind-up the Power Cord on the MS-100 Handle. Trigger & High / Low High / Low...

  • Page 11: Step 3 - Pouring And Placing Levelling Compound

    2. Disengage castor wheel brake. 3. Wheel the MS-100 to the desired area (use caution when moving the loaded bucket). 4. Disengage (unlock) ‘Locking Pin’ at the base of the bucket. 5. Using a controlled motion (use the ‘MS-100 handle and pouring Handle) pour mixed Levelling Compound where required.

  • Page 12: Limited Warranty

    WARRANTY: (Ex-factory/ Reseller premise) MAKINEX warrants to the original purchaser: • MAKINEX provides a Limited One Year Warranty that applies to MS-100 Mixing Station only (this excludes the Stirrer/mixer and any other attachments and consumables). • All wheels must be thoroughly cleaned after each use, failure to do so will void warranty.

  • Page 13: Warranty Exclusions

    Manufacturer. • It is the responsibility (and cost) of MAKINEX or our appointed agent to return the machine to be repaired or replaced under warranty to the consumer- this is valid for domestic territories only (e.g.

  • Page 14: Contact Information

    CONTACT INFORMATION For sales, service, warranty and parts for all MAKINEX products; please refer below. SALES, SERVICE, SPARE PARTS & WARRANTY SALES TEL 1300 795 953 or +61 2 9460 8071 WEB www.makinex.com.au AUSTRALIA SERVICE, SPARE PARTS & WARRANTY EMAIL service@makinex.com.au...

  • Page 15: Appendix A - Risk Assessment

    APPENDIX A – RISK ASSESSMENT MAKINEX MS-100 Operator’s Manual Rev0919 Page 13 of 15...
  • Page 16 MAKINEX MS-100 Operator’s Manual Rev0919 Page 14 of 15...
  • Page 17 MAKINEX MS-100 Operator’s Manual Rev0919 Page 15 of 15...

Table of Contents