Step 4: Connecting Fm/Mw Antennas; Step 5: Connecting The Power Cord - Philips FWD573/98 User Manual

Step 4: Connecting FM/MW
antennas
ï
●
Connect the supplied MW loop antenna to the
MW jack. Place the MW loop antenna on a
shelf or attach it to a stand or wall.
●
Connect the supplied FM antenna to the FM
jack. Extend the FM antenna and fix its end to
the wall.
For better FM stereo reception, connect an
outdoor FM antenna to the FM ANTENNA
terminal.
Notes:
– Adjust the position of the antennas for optimal
reception.
– Position the antennas as far as possible from
your TV set, VCR or other radiation sources to
prevent unwanted interference.
Step 5: Connecting the power
L
R
After everything is connected properly,
plug in the AC power cord to the power
outlet.
Never make or change any connection with the
power switched on.
On the DVD Mini Hi-Fi System
"AUTO INSTALL-PRESS
PLAY" may appear on the
display panel. Press 2; on the
front panel to search and store
all available radio stations or press 9 to exit (See
"Tuner Operations-Presetting radio stations").
If your system is equipped with a Voltage
Selector, set the VOLTAGE SELECTOR to the
local power line voltage.
Connections
cord
COMPONENT
VIDEO IN
S-VIDEO
IN
Pr/Cr
AUDIO
OUT
~ AC MAINS
Pb/Cb
VIDEO IN
Y
L
R
VOLTAGE
SELECTOR
110V~127V 220V~240V
13