Vax ONE PWR CORDLESS GLIDE Series User Manual page 8

GETTING STARTED
FILLING THE WATER / SOLUTION TANK
IMPORTANT: Do not leave solution stored in the tanks between uses.
NOTE: When unpacking the machine, the water/solution tank cap will be attached to the side of the
tank. Before first use, and after water/solution has been added, ensure that the cap is screwed onto
the water/solution tank before refitting onto the machine.
Lift to remove the water/solution tank
from the back of the machine.
SOLUTION
LARGE AREA
WATER
SOLUTION
WATER
SMALL AREA
Unscrew the cap and fill to the desired
level using the markers on the tank.
support.vax.co.uk
Replace the cap and push the tank
down on to the machine until it clicks
into place.
8