Tuner Operations
Manual preset programming
1
Press TUNER repeatedly to select the desired
tuner band: FM or MW.
2
Press and hold SEARCH•TUNING 1 /
¡ on the system or on the remote control to
search a radio frequency.
3
Press PROGRAM.
➜
"PROG" will display.
4
Press O / P or numeric keys (0-9) to
select the desired preset number.
5
After selecting an address number, press
PROGRAM again to store the radio station.
●
Repeat steps 3-5 to store other preset radio
stations.
Note:
– If you attempt to store more than 40 preset
radio stations, "FULL" will be displayed.
- This until exits presetting mode if no button is
pressed within 20 seconds.
Selecting a preset radio station
●
In tuner mode, press O / P or use the
numeric keys (0-9) to select the desired
preset number.
➜
The preset number and radio frequency
appear on the display panel.
Deleting a preset radio station
1
In TUNER mode, press O or P to select the
preset radio station to be erased.
2
Press and hold 7 on the system until
"DELETED" appears on the display panel.
➜
The current preset radio station will be
deleted.
➜
The rest of the preset radio stations will shift
up.
●
Repeat steps 1-2 to erase other preset radio
stations.
34
Changing tuning grid
In some countries (only applicable for certain
regions), this function can changes the
frequency steps between grid 9 and grid10,
the frequency step between adjacent channels in
the MW band is 9 kHz tuner mode, (10 kHz in
some areas). The preset frequency step in the
factory is 9 kHz.
1
Plug the AC power cord.
2
Press TUNER to select MW mode.
3
Press and hold 38 for more than 5 seconds on
the panel.
Note:
– All preset stations will be lost and need to be
reprogrammed.