Using S-Video In Jack; Using Headphone Jack; Using An Accessory Rf Modulator - Philips FWD397/98 User Manual

Connections

Using S-Video In jack

● Use the S-Video cable (not supplied) to connect
the system's S-VIDEO jack to the S-Video
input jack (or labeled as Y/C or S-VHS) on the
TV set.
● To listen this system channels through TV , use
the audio cables (white/red) to connect AUX
IN (L/R) jacks to the corresponding
OUT jacks on the TV set

Using Headphone jack

● To listen to TV channels through this system, use
the audio cables (white/red, not supplied) to
connect AUX IN (L/R) jacks to the
HEADPHONE jacks on the TV set (With a
diameter 3.5mm stereo jack).
12
OUT
AUDIO
● Use the composite cable (yellow) to connect the
● Use the RF coaxial cable (not supplied) to

Using an accessory RF modulator

IMPORTANT!
– If your TV set only has a single
Antenna In jack (or labeled as 75 ohm or
RF In), you will need a RF modulator in
order to view the DVD playback via TV.
See your electronics retailer or contact
Philips for details on RF modulator
availability and operations.
system's VIDEO jack to the video input jack on
the RF modulator.
connect the RF modulator to your TV's RF jack.