MP3 LINK
Clock setting
The clock can be set in either 12-hour or
24-hour mode ("AM 12:00" or "00:00" for
example).
1
In standby or view clock mode, press CLOCK/
TIMER (or CLOCK on the remote control )
on the remote control.
2
Press PROG to select clock mode.
3
Press CLOCK/TIMER (or CLOCK on the
remote control ) to activate to adjust clock time.
4
Press S / T (or à / á on the remote
control) repeatedly to set the hour.
5
Press ALBUM/PRESET +/- (or ALB/
PRESET +/- on the remote control )
repeatedly to set the minute.
6
Press CLOCK/TIMER (or CLOCK on the
remote control ) again to store the setting.
➜
The clock starts working.
To exit without storing the setting
●
Press Ç.
Notes:
– The clock setting will be cancelled when the
power cord is disconnected or if a power failure
occurs.
– During clock setting, if no button is pressed
within 90 seconds, the system will exit clock setting
mode automatically.
Timer setting
The system can switch on to CD or TUNER
mode automatically at a preset time, serving as
an alarm to wake you up.
IMPORTANT!
– Before setting the timer, ensure that the
clock is set correctly.
1
In standby mode, press and hold CLOCK/
TIMER (or TIMER on the remote control ) on
the remote control for more than two seconds
to select timer mode.
➜
The last timer setting starts flashing.
➜
The selected source will be lighted.
2
Press DISC 1/2/3 or TUNER to select the
desired source.
●
Before setting timer, make sure the music source
has been prepared.
CD – Load the disc(s).
TUNER – tune to the desired radio station.
3
Press CLOCK/TIMER (or TIMER on the
remote control ) to activate to adjust time.
4
Press S / T (or à / á on the remote
control) repeatedly to set the hour for the timer
to start.
Clock/Timer
19