Lighting Instructions - Napoleon ROGUE 425 Manual

Hide thumbs Also See for ROGUE 425:
Table of Contents

Advertisement

8

Lighting Instructions

!
WARNING!
WARNING!
WARNING!
gas supply valve.
www.napoleon.com
N415-0557-AU APR 04.19.indd 8
Side
Burner
Igniter
Left
Burner
Open lid.
Inspect the drip pan for excess grease build-up and clean if necessary.
Ensure all burner controls are in the off position. Slowly turn on the
Main Burner
Lighting
1. Open grill lid
2. Push and turn any main burner knob
slowly to the high position. If the pilot
lights, continue to push down on the control
knob until the burner lights and then
release.
3. If the pilot does not ignite, then
immediately turn the control knob back to
the 'off position and repeat step 2 several
times.
4. If the pilot and burner will not ignite
within 5 seconds, turn the control knob to
the 'off' position and wait 5 minutes for any
excess gas to dissipate. Either repeat steps
2 and 3 or light with a match.
5. If lighting the unit with a match, clip the
match into the supplied lighting rod. Hold
the lit match down through the grill and
sear plate while turning the corresponding
burner valve to high.
Centre
Right
Burner
Burner
Side Burner Lighting
(if equipped)
1. Open burner cover.
2. Turn side burner control to high position.
3. Press and hold igniter button until burner
lights, or light by match.
4. If ignition is not immediate, turn burner control
off. Wait 5 minutes. Repeat.
Off Position
OFF
HIGH
LOW
N415-0557-AU APR 04.19
4/4/2019 12:09:41 PM

Advertisement

Table of Contents
loading

Table of Contents