Table of Contents
Advertisement
Tape Operation/Recording
IMPORTANT!
– Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
– Recording is possible only in tape deck.
Preparation for recording
1
Load a recordable tape into tape deck with the
full spool to the left.
2
Prepare the source to be recorded.
DISC – load the disc(s).
USB - insert a USB driver.
TUNER – tune to the desired radio station.
AUX – connect external equipment.
3
Press DISC, USB, TUNER or AUX to select
the source.
4
Start to play the selected source.
Press ● to start recording.
5
To stop recording
● Press 70 on the system.
Disc synchro recording
1
Press DISC to select the disc mode.
● You can record programmed tracks in the order
you want.
Press ● to start recording.
2
➜ "REC" will flash, but the first 7 seconds of the
start passage will not be recorded.
Selecting another track during recording
1
Press ; to interrupt recording.
Press I2 / 3I to select another track.
2
3
Press ; to resume recording.
To stop recording
● Press 70 .
32
Advertisement
Table of Contents
