Rear Connections - Philips FWM206/07 User Manual

Preparations

Rear connections

The type plate is located at the rear of the
system.
A
Power
– Before connecting the AC power cord to
the wall outlet, ensure that all other connec-
tions have been made.
WARNING!
– For optimal performance, use only the
original power cable.
– Never make or change any connections
with the power switched on.
To avoid overheating of the system, a
safety circuit has been built in. Therefore,
your system may switch to Standby mode
automatically under extreme conditions.
If this happens, let the system cool down
before reusing it (not available for all
versions).
FM ANT
AUX IN
L R
8
LOW CH
Ð +
L
R
L
R
HIGH CH
B
Speakers Connection
Front Speakers
Connect the speaker wires to the SPEAKERS
terminals, right speaker to "R" and left speaker
to "L", red wires to "+" and black wires to "-"
of the woofer connection terminals, blue wires
to "+" and grey wires to "-" of the tweeter con-
nection terminals.
Fully insert the stripped portion of the speaker
wire into the terminal as shown.
Notes:
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to
any one pair of + / - speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please
refer to the SPECIFICATIONS section of this
manual.
11