Advertisement
Quick Links
Mini Hi-Fi System
Quick start guide
1
Connect
2
Setup
3
Enjoy
FWM208_QSG_V1.0.indd
2-5
What's in the box
FWM208
Remote
MP3 LINK cable
Power plug
User manual
Control
adaptor
1
Connect
A
Prepare the remote control
1
Open the battery compartment.
1
2
Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
B
Connect Speaker
1
Plug the two gray-blue cables into the
"HIGH CH" sockets as indicated by the
"+/-" symbols, right speaker to "R" and left
speaker to "L".
2
Plug the two red-black cables into the
"LOW CH" sockets as indicated by the
"+/-" symbols, right speaker to "R" and left
speaker to "L".
EN
1
Connect
XXXXXXX
FWM208
FWM208
C
Connect power
Quick start guide
1
Connect
2
Setup
C Caution
2
Enjoy
• Risk of product damage! Ensure that the
Eng
power supply voltage corresponds to the
Quick Start Guide
voltage printed on the back or the underside
of the unit.
• Risk of electric shock! When you unplug the
AC power cord, always pull the plug from the
socket. Never pull the cord.
1
Connect the power cord to the wall outlet.
2
Setup
3
2
A
Set clock
1
In standby mode, press and hold CLOCK.
»
The hour digits are displayed and begin
to blink.
2
Press /
on the remote control to set
the hours.
3
Press CLOCK.
»
The minute digits are displayed and
HIGH
begin to blink.
+
4
+
Press /
to set the minutes.
L
R
_
_
5
Press CLOCK to confirm the time.
LOW
3
Enjoy
A
B
Play disc
Play from USB
1
Press DISC to select the disc source.
1
Connect the USB device into the
2
Press OPEN/CLOSE on the front panel
2
Press USB to select the USB source.
to open the disc tray.
Play starts automatically.
»
3
Insert a disc with the printed side facing up,
• To pause/resume play, press
then close the disc tray.
• To stop play, press
.
Play starts automatically.
»
• To select an album, press ALBUM/
• To pause/resume play, press
.
PRESET +/-.
• To stop play, press
.
•
To skip to a track, press
/ .
•
To skip to a track, press
/ .
•
To search within a track, press and
•
To search within a track, press and
hold
/ . Release to resume
hold
/ . Release to resume
normal play.
normal play.
Program and listen to radio
C
stations
You can program a maximum of 20 preset
radio stations.
1
In tuner mode, press and hold
PROGRAM for 2 seconds to activate
automatic program mode.
»
[AUTO] (auto) begins to blink.
»
All available stations are programmed
in the order of waveband reception
strength.
The first programmed radio station is
»
broadcast automatically.
2
Press ALBUM/PRESET +/- to select a
preset radio station.
© Royal Philips Electronics N.V. 2010
All rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
Printed in China
FWM208_QSG_V1.0
1/26/2010
socket.
.
5:32:34 PM
Advertisement
