Installation - Zanussi ZEE3922IXA User Manual

Table of Contents

Advertisement

Available languages

Available languages

SERVICE
To repair the appliance contact an Authorised
Service Centre.
Use original spare parts only.
DISPOSAL
WARNING! Risk of injury or
suffocation.

INSTALLATION

WARNING! Refer to Safety chapters.
BEFORE THE INSTALLATION
Before you install the hob, write down the
information bellow from the rating plate. The rating
plate is on the bottom of the hob.
Model .......................................
PNC .........................................
Serial number ...........................
BUILT-IN HOBS
Only use the built-in hobs after you assemble the
hob into correct built-in units and work surfaces
that align to the standards.
CONNECTION CABLE
The hob is supplied with a connection cable.
To replace the damaged mains cable, use the
cable type: H05V2V2-F which withstands a
temperature of 90°C or higher. Speak to your
local Service Centre.
ASSEMBLY
40-50 mm
min. 650 mm
14
min. 100 mm
Contact your municipal authority for information
on how to discard the appliance correctly.
Disconnect the appliance from the mains
supply.
Cut off the mains electrical cable close to the
appliance and dispose of it.
A
B

Advertisement

Table of Contents
loading

Table of Contents