Gateway Functionality; Pair Night Owl Devices - Night Owl WG4 Series User Manual

5.2 Gateway Functionality

5.2.1 Pair Night Owl Devices

Press the Sync button for approximately 3 seconds to start the pairing process. The Gateway will
1
play the voice prompt "I am pairing to the Night Owl Device, please be patient."
NOTE: If all of the channels are in use, the Gateway will play the voice prompt "Oops, all my channels are in use. To
add more devices, buy another me."
The Gateway will spend up to 1 minute searching for Night Owl Devices to pair.
2
If the Gateway doesn't find any Night Owl Devices to pair with, the voice prompt "Oops, the
2a
pairing failed, please repeat the process" will play.
When adding multiple Night Owl Devices to the Gateway, if at least one fails to pair, you will
2b
hear the voice prompt "Oops, the pairing failed, please repeat the process."
When the Gateway successfully pairs to ALL Night Owl devices, the voice prompt will say
2c
"WooHoo! Setup is now complete."
"Oops, the pairing
failed, please repeat
the process."
"WooHoo!
Setup is now
complete."
20