System Requirements; Package Contents - Night Owl WG4 Series User Manual

Chapter 3: Specifications

3.1 System Requirements

Please be sure that your mobile device complies with the following specifications:
• Android™: 4.2 and above
• iOS : 9 and above
®
THIS MANUAL WAS ACCURATE AT THE TIME IT WAS COMPLETED. DUE TO OUR ONGOING EFFORT TO
CONSTANTLY IMPROVE OUR PRODUCTS, SPECIFICATIONS MAY HAVE BEEN ADDED OR CHANGED.

3.2 Package Contents

*
Disclaimer: The exact components of your product, images and quantities may vary depending on your model number.
Wireless Gateway
Model # WG-20W-4
1 x Gateway
Gateway Power Cord
*1 x microSD Card
(May not be included)
*Disclaimer: User
MUST format
the SD card if
the Gateway was
purchased without a
pre-installed card.
NOTE: For best results, use the included Night Owl accessories. Third party accessories may not work properly.
1 x 9.8 ft. 1 x 6 ft. RJ-45
Cable (Ethernet)
1 x Gateway
Power Supply
Bracket Mounting
Hardware
*
Wireless IP Indoor/Outdoor Camera
Model # WCM-SD2POU-BU
Camera Camera Antenna
(1 per camera)
* If included, screw onto Camera
*
Wireless IP Indoor Camera
Model # WCM-SD2PIN
Camera 9.8 ft. Camera Power
Cord (1 per Camera)
Magnetic Mounting
Bracket (1 per Camera)
Camera Power Supply
(1 per Camera)
16.4 ft. Camera
Power Supply
(1 per Camera)
10
Reset Pin
(1 per Camera)
Adhesive Mounting
Tape (1 per Camera)
Bracket Mounting
Hardware (1 per Camera)
Bracket Mounting
Hardware
(1 per Camera)