Booting Process - Night Owl WG4 Series User Manual

Chapter 5: Getting Started

5.1 Booting Process

The status lights will be a steady green for up to 30 seconds.
1
The status lights will flash green for 1-2 seconds.
2
The Gateway plays the voice prompt: "Hello, I am powering up. Be patient and please leave my power on."
3
The Gateway checks for an Internet connection (may take up to a minute). A voice prompt will either
4
say "Oops, I am NOT connected to the Internet" or "I am connected to the Internet."
NOTE: The Gateway MUST be connected to the internet to search for, and update to, the latest Firmware version.
When connected to the internet, the Gateway will search for the latest Firmware version.
5
If there is no new Firmware available, the Gateway plays the voice prompt "Thanks for checking,
5a
but my Firmware is up to date."
If there is new Firmware available, the Gateway plays the voice prompt "I am upgrading my
5b
Firmware. Be patient and please leave my power ON."
After the upgrade is completed, the Gateway plays the voice prompt "WooHoo! Firmware upgrade is complete."
If the upgrade fails, the Gateway plays the voice prompt "Oops, the upgrading process failed, please retry later."
NOTE: If the upgrade is successful, the Gateway will automatically reboot and update the Firmware.
The Gateway searches its channels for connected Night Owl devices.
6
If there are no devices paired with the Gateway, the voice prompt "Pair me to other Night Owl
6a
devices by pressing my Sync button for 3 seconds" will play.
If the Gateway is paired with 1 or more Night Owl devices, NO audio will be played.
6b
Booting process is complete.
7
"Oops, I am not
connected to the
Internet."
19
"I am connected
to the Internet."