Interrupting The Toasting Process; Warming Function; Thaw Function; Crumb Tray - Silvercrest STOS 826 B1 Operating Instructions Manual

• Press the operating button 3 downwards. The
control lamp on the stop button 6 glows.
• The automatic bread aligner centres the inserted
bread into the toasting slots 2.
• When the desired level of browning has been
reached the toaster switches itself off automati-
cally and the slices are ejected to the top.
• This appliance has a lifting function, which ma-
kes it easier and safer for you to take the hot sli-
ces of toast from the toasting slots 2. For this, sli-
de the operating button 3 upwards.
Interrupting the toasting
process
If you wish to interrupt the toasting process, press
the STOP button 6.
The toaster switches itself off. The control lamp extin-
guishes. The slices of bread are ejected.

Warming function

The warming function 5 makes it possible for you
to warm bread without browning it. For example,
toast that has gone cold. The bread is only briefly
warmed.
• Insert the bread and press the operator button
3 down.
• Activate the button for the warming function 5.
The control lamp integrated into the button for
the warming function 5 glows.
• The toaster switches itself off automatically, the
control lamp extinguishes and the bread slices
are ejected.

Thaw function

Through activation of the thaw function 4 frozen
bread can also be thawed. With this, the toaster
slowly warms the bread.
• Adjust the browning controller 7 to the desired
level of browning.
• Insert the bread and press the operator button
3 down.
• Activate the button for the thaw function 4.
The control lamp integrated into the button for
the warming function 4 glows.
• The toaster switches itself off automatically, the
control lamp extinguishes and the bread slices
are ejected.
Dependent on the setting of the browning level,
the bread is either thawed or browned.

Crumb tray

When toasting, crumbs that fall from the bread are
collected in the crumb tray 8. To empty the crumb
tray, simply pull it 8 out to the side.

Bread roll holder

• NEVER lay bread rolls directly onto the toaster,
ALWAYS use the bread roll holder 1.
• Press the button for the bread roll holder 9
down. The bread roll holder 1 elevates itself.
• Lay the bread rolls on it and start the toasting
procedure. AS A MINIMUM, position the toa-
sting dial 7 at level 3. To discover the positio-
ning that best meets your personal preference,
try out several settings. Subject to the desired
level of browning, or the type of product to the
toasted, the adjustment of the toasting dial 7 is
variable.
- 4 -