Service Mode; Function Table Of The Remote Control For Service - Pioneer CJ-V55 Service Manual

CJ-V55
5. SERVICE MODE
• As to using the service mode, refer to the operating instructions (pages 23 - 26).
And also as to the cord table of the service mode, refer to the operating instructions (pages 20-22).
• Shows the function table of the remote control (RU-V101) for sendee as follows. When operating the CD changer
section directly, it is able to operate as shown in the below by connect the wired-remote control to the CD
chager.
5.1 FUNCTION TABLE OF THE REMOTE CONTROL FOR SERVICE
* 1 REJECT
* 1 PAUSE
*1 PLAY
*2 STILL/STEP
*2 STILL/STEP
*2
MULTI-SPEED +
Test command
*2 MULTI-SPEED -
Test command
*1 SCAN
► ►
Scan fwd
*1 SCAN
◄ ◄
Scan rev
*1 CLEAR
Clear
*2
FRAME
Frame set
*2
TIME
Time set
*2
CHAPTER
: Track set
*1 SEARCH
Search
lOkey
Numerical input
DISPLAY
(FUNC + 1)
no entry
STILL
(FUNC + 2)
no entry
C-MODE (FUNC + 3)
no entry
VIDEO
(FUNC + 4)
no entry
*1
STOP.M
(FUNC + 5)
Stop marker
*1
START
(FUNC + 6) Start
AUDIO
(FUNC + 7)
no entry
SPEED
(FUNC + 8) no entry
*1 OPEN (FUNC + 9)
Magazine eject
* 1 •
Normal function command
* 2-
Function command is different from
the LD-V530.
Not marked. No entry command
Play
Disc select
Disc return
• Test command
0 + MULTI-SPEED {+, -) keys
1 + MULTI-SPEED (+, -) keys
2 + MULTI-SPEED (.+,-) keys
3 + MULTI-SPEED-(+;-—)■ keys
4 + MULTI-SPEED (+, -) keys
5 + MULTI-SPEED (+, -) keys
6 + MULTI-SPEED ( + , -) keys
7 + MULTI-SPEED (+, -) keys
8 + MULTI-SPEED (+, -) keys
9 + MULTI-SPEED (+, -) keys
:LD-ON
: FOUS IN i
: Spindle kick
; Tracking and slider servo-ON-
: Slider fwd (500ms) n MULTI-SPEED (+, -) key
: Slider rev (500ms) J
; Tracking and slider servo OFF
: Slider stop and spindle stop
: Slider stop and spindle stop
:LD-OFF
14