Pc Boards Name; Removing The Glass; Removing The Glow Lamp - Pioneer CJ-V55 Service Manual

CJ-V5!
3.9 REMOVING THE GLASS
1. Remove the top door assembly. (Refer to section
3.1.)
2. Set the glass side of top door assembly to the
downward. Remove thirty-seven screws (D to
remove the top door base, then remove the glass.
4. P. C. BOARDS NAME
MAIN SECTION
MESS.MESSAGE
DISP.-DISPLAY
KEYS.KEYBOARD
BRAN.BRANCH
ROTA.ROTATION
POSS.POSITION SENSOR
LAMP.LAMP
CNTB.COUNTER BOARD
PAMP.POWER AMPLIFIER
SPTB.SPEAKER TERMINAL BOARD
LOJB.LINE OUT JACK BOARD
PREB.PRE AMPLIFIER BOARD
POWB.POWER BOARD
ACIN.AC INPUT BOARD
ASEL.AMPLIFIER VOLTAGE SELECTOR BOARD
PSWB.POWER SWITCH BOARD
CDJB.CD JACK BOARD
CONT.CONTROL
OPER.OPERATION
DIPS.DIP SWITCH
CRJB.CD REMOTE JACK BOARD
RMJB.REMOTE CONTROL JACK BOARD
CNNB.CONNECTION BOARD
CD PLAYER SECTION
EKEY.EJECT KEY
DEGT.DIGITAL DECOADING UNIT
ANLG.ANALOG UNIT
DJAK.DIGITAL JACK
PJAK.PIN JACK
MJSW.MAGAZINE EJECT SWITCH
SENS.SENSOR
REJC.REJECT
FREC.FLEXIBLE READER CONNECTOR
HRMB.HOUR METER BOARD
RMJB.REMOTE JACK BOARD
3.10 REMOVING THE GLOW LAMP
Refer to the operating instructions (page 20).
13