CJ-V5!
3.2 REMOVING THE MENU MOTOR
ASSEMBLY
1. Remove two screws (D to remove the menu motor
assembly.
3.3 REMOVING THE SYNCHRO BELT
1. Loosen two screws ® and remove two springs with
plier, and remove two synchro belts by pushing
the synchro pulley in the direction of arrow.
Note : When the synchro belt is replaced, be sure to
perform the three sides of the menu synchronous
adjustment.
Menu board assembly
Synchro pulley
3.4 REMOVING THE LAMP AND
NETWORK ASSEMBLY
1. Remove
six
screws (D to
remove
the
network
assembly.
2. Remove four screws © to remove the LAMP.
3.5 REMOVING THE ROTA AND POSS
1. Remove four screws (D to remove the ROTA.
2. Remove a screw ® to remove the POSS.
Menu board assembly