Installing Harness System - Cosco SCENERA NEXT Manual

Installing Harness System

53
1 Insert Buckle's
Metal Retainer
into Slot Closest
1
to Child
2
3
Buckle must face
out. You must use
the 1st or 2nd buckle slots when child
restraint is used rear facing. Any slot
can be used when forward facing.
2 Pull Metal Retainer
Completely
Through Pad
and Shell
3 Check Buckle
Pull up on buckle
to make sure it is
secured.
The buckle must
not pull out.
4
Rethread Harness
Strap
With sewn end of
harness strap loop
facing the buckle,
thread harness strap
down through hip harness slot.
5 Pull Harness Strap
Across Bottom of
Shell
Harness strap
must lie in front of
harness adjustment
strap as shown. Push harness strap up
through other hip harness slot.
6
Make Harness
Strap Even
Sewn ends of
harness strap loops
must face each
other.
7 Thread Buckle and
Chest Clip
Harness strap ends
go through the back
of buckle tongues
and through the chest
clip front to back as
shown.
8 Thread Harness
Straps Into Correct
Shoulder Harness
Slots For Your Child
For Rear-Facing
child fi t, see page 7.
For Forward-Facing child fi t, see
page 8.
continued on next page
54